Motion & Position Sensors      



image

Precise Position Performance. Honeywell Sensing and Productivity Solutions offers a full line of position sensors to meet a variety of operating environments and application needs – all built to deliver robust, long-lasting performance and enhanced product life.

Honeywell SMART Position Sensors (Superior Measurement, Accuracy, Reliability, and Thinking) enable highly accurate motion control, improving operational efficiency and safety. Measuring linear, angular, or rotary movement of a magnet attached to a moving object, their non-contact design eliminates mechanical failure mechanisms, reducing wear and tear, improving reliability and durability, and minimizing downtime. They are also easy to install, reducing setup costs.

Honeywell Non-contact Hall-effect Sensors respond to the presence or to the interruption of a magnetic field, using a solid-state Hall-effect IC to sense rotary movement of the actuator shaft and then producing a proportional output. The IC, circuitry and magnets are galvanized with an integral connector – more than a match for the most unforgiving conditions. Other benefits include: 360-degree operating range with multi-turn allowable rotation, low torque actuation, and greatly reduced wearout mechanisms.

Encoders are available in both mechanical and optical versions, and are best for potential applications requiring panel-mounted, manually-operated rotary sensing.

Inertial Measurement Units (IMU) are high-end position sensors with sensitive multi-axis motion control. These sensors measure the motion of the equipment onto which they are attached and deliver data to the equipment’s control module, allowing the operator to focus on other equipment functions, and enabling more precise control than can be achieved by using only the human eye, thus increasing safety, stability and productivity.

Resolvers are rotary and angle absolute position sensors that provide non-contact measurement for 360° sensing, enhanced accuracy, resolution, and repeatability under severe environmental conditions. They are inherently radiation hardened and offer durable electromagnetic compatibility (EMC) performance.

T&M Torque Transducers possess a tradition of quality and accuracy in measurement that stretches back over half a century. Honeywell has spent decades improving and customizing both rotary and reaction torque transducers. Our extensive product line reflects this dedication, offering unmatched application and mechanical flexibility diversity. Having performed thousands of modifications to individual products, Honeywell’s high-quality, custom design solutions ensure that from basic torque telemetry to advanced digital measurement, you will find a product that suits your application.

T&M Accelerometers include a full range of configurations, including miniature transducers, bi-axial and tri-axial measurements and special submersible units, all available in numerous mounting configurations, including screw type, bolt mount, epoxy and others. Plus, Honeywell offers both strain gauge and piezo-electric technology, making our product line one of the most robust in the market. Honeywell accelerometers are designed to survive most overloads and are built to perform in the most extreme temperature conditions.

T&M LVDTs are designed to meet the requirements common to most single and multiple-point industrial gauging applications. This offering includes a diverse set of micro-displacement instruments, often used in research and scientific laboratories. Honeywell’s displacement transducer products are each designed as a complete package, eliminating the need for customers to identify, purchase and install additional components in order to implement the transducer. Solid, stainless steel construction and available submersible connectors add additional value to a line of rugged LVDTs that is certain to meet your needs.

Don’t see exactly what you need? Custom options are available – contact us with your application requirements.





POTENTIOMETERS:



ROTARY POTENTIOMETERS:


CONDUCTIVE PLASTIC POTENTIOMETERS:


    308, 408 Series:


    Reduced cost potentiometer that offers 0.5 W power rating in a compact body. Potential applications include manual controls, audio and lighting consoles, medical equipment, precision joysticks, and telecommunications.

  1. 308, 408 Series - Features:
    1. Compact, Modular package, Conductive plastic element,
    2. 0.5 W power rating, Nickel-plated brass shaft and bushings,
    3. Enhanced performance, 408: sealed for board washing,
    4. PC and solder-hook terminals, CW audio and linear tapers available.




  2. 380, RV4, 485, 53C, 385 Series:


    Supplies good performance at a reasonable price. Wide range of resistance values promotes flexibility in the applications. Wide variety of tapers creates flexibility in the output signal profile, allowing use in a wide variety of applications. Potential applications include use on audio and visual equipment, foot pedal controls, machine controls, welding equipment, gear shifters, joysticks, and throttles.

  3. 380, RV4, 485, 53C, 385 Series - Features:
    1. Cost-effective,
    2. Wide range of resistance values (100 Ohm to 5 MOhm, inclusive),
    3. Wide variety of tapers.




  4. Quality, Reliability, Enhanced life, Global reach:


    Honeywell S&C rotary position sensors deliver the features you need and quality you demand. Even better, we offer worldwide support and manufacturing.



    Potentiometers:


    The Honeywell S&C lineup is legendary in military and aerospace industries for reliability, durability, and enhanced life. Our potentiometer designs allow customization to your specs and cost requirements without sacrificing reliability and accuracy. Measuring rotary position or linear displacement, these units easily withstand exposure to harsh chemicals and high temperatures.







image image

Conductive Plastic Pots 308, 408 Series 380, RV4, 485, 53C, 385 Series
Description • 308: compact modular housing
• 408: sealed for board washing
• 380: 2 W conductive plastic pot
• RV4: Military version of 380
• 485: Custom version of 380
• 53C: Cost-effective version of 380
• 385: Custom version of 53C
Expected rotational life 50 k cycles 100 k cycles, 25 k cycles
Element type conductive plastic conductive plastic
Power rating 0.5 W 2 W
Termination PC, solder hook solder lug with/without center tap, PC pin, fast-on, custom
Resistance range 308: 100 Ohm to 1 mOhm
408: 500 Ohm to 10 kOhm
100 Ohm to 5 MOhm, inclusive
Housing material thermoplastic polyester stainless steel
Bushing 1/4-32 NEF-2A or 3/8-32 NEF-2A; nickel-plated brass; standard, locking 3/8-32 NEF-2A; nickel-plated brass; standard, high torque, custom
Shaft Ø3,18 mm [0.125 in], Ø6,35 mm [0.250 in]; nickel-plated brass Ø6,35 mm [0.250 in]; nickel-plated brass
Electrical taper CW audio, linear linear, log, reverse log, custom





    574 Series Benefits:


    Reduced cost commercial potentiometer with the benefits of a conductive plastic element. Potential applications include welding/heating controls, joysticks, and manual controls.

  1. 574 Series - Features:
    1. Conductive plastic element, 0.5 W power rating, Reduced mounting profile,
    2. Quiet electrical output, Vertical mounting with support bracket, PC style mounting,
    3. Smooth feel, Robust construction, All plastic construction, Metric bushing, Linear taper.




  2. 575 Series:


    Reduced cost commercial potentiometer with the benefits of a conductive plastic element. Potential applications include welding/heating controls, joysticks, and manual controls.

  3. 575 Series - Features:
    1. Conductive plastic element, 0.5 W power rating, Reduced mounting profile,
    2. Quiet electrical output, Solder hook terminals for panel mounting, Smooth feel,
    3. Robust construction, All plastic construction, Linear taper.





image image

Conductive Plastic Pots 574 Series 575 Series
Description low mounting profile thermoplastic panel mount
Expected rotational life 50 k cycles 50 k cycles
Element type conductive plastic conductive plastic
Power rating 0.5 W 0.5 W
Termination PC with bracket PC, solder hook
Resistance range 1 kOhm to 100 kOhm 1 kOhm to 50 kOhm
Housing material glass-reinforced plastic glass-reinforced plastic
Bushing Ø9,53 mm [0.375 in]; glass-reinforced plastic Ø9,53 mm [0.375 in]; glass-reinforced plastic
Shaft Ø6,35 mm [0.250 in]; glass-reinforced plastic Ø6,35 mm [0.250 in]; glass-reinforced plastic
Electrical taper linear linear





    381 Series Benefits:


    Robust construction in a low-cost industrial package. Potential applications include manual and audio controls, and telecommunications.

  1. 381 Series - Features:
    1. Conductive plastic element, 1 W power rating, Solder lug terminals,
    2. Metal case and nickel-plated brass shaft and bushings,
    3. Locking-style bushing, rotary switch, or dual section options available, Linear taper.




  2. 392, RV6 Series Benefits:


    Devices may be automatically soldered on a PCB using the wave soldering process instead of being manually soldered, saving time and yielding consistent results. The PCB containing the soldered devices may be washed after soldering, saving time and yielding consistent results. Good performance at a reasonable price. Wide range of resistance values promotes flexibility in the applications. May be used where space constraints may be present. Potential applications include audio and visual equipment, light switches, hand-held multimeters and mobile monitoring devices, test and measurement equipment, communications equipment, thermostats, hand-held medical equipment and mobile monitoring devices, medical laboratory and diagnostic equipment, and vehicle manual controls.

  3. 392, RV6 Series - Features:
    1. Wave solderable, PCB washable, Cost-effective,
    2. Wide range of resistance values (100 Ohm to 5 MOhm, inclusive),
    3. Small package size.





image image

Conductive Plastic Pots 381 Series 392, RV6 Series
Description 0.5 in diameter, 1 W conductive plastic • 392: 0.5 W conductive plastic pot
• RV6: Military version of 392
Expected rotational life 25 k cycles tested to 50 k cycles
Element type conductive plastic conductive plastic
Power rating 1 W 0.5 W
Termination solder lug solder hook, PC pin, custom
Resistance range 100 Ohm to 5 mOhm 100 Ohm to 5 MOhm, inclusive
Housing material stainless steel thermoplastic
Bushing Ø6,35 mm [0.250 in], Ø9,53 mm [0.375 in]; nickel-plated brass; standard, locking 1/4-32 NEF-2A, nickel-plated brass; metal panel seal: standard, split locking; metal no panel seal: standard, split locking; unthreaded; plastic standard, trimmer; custom
Shaft Ø3,18 mm [0.125 in]; nickel-plated brass Ø3,18 mm [0.125 in]; nickel-plated brass or thermoplastic
Electrical taper CW audio, linear linear, log, reverse log





    578 Series Benefits:


    Precision-type potentiometer with low torque and very linear tapers delivers enhanced control. Potential applications include off-road vehicles, electric vehicles, marine controls, material handling, personal mobility, manual controls, telecommunications, and audio equipment.

  1. 578 Series - Features:
    1. Conductive plastic element, 0.5 W power rating, Variable resistor technology,
    2. Low mounting profile, Quiet electrical output, Precision control, PC terminals,
    3. Nickel-plated shaft and bushing, Smooth feel, Robust construction, Linear taper,
    4. Central tap version available.




  2. 585 Series Benefits:


    Designed to be used as a low-wattage component that can be panel mounted or PC mounted. Robust construction in a low-cost commercial package, using carbon composition elements. Potential applications include manual and audio controls, heating equipment, and telecommunications.

  3. 585 Series - Features:
    1. Compact size, Carbon element, 0.05 W power rating,
    2. Horizontal mount, PC terminals,
    3. Metal shaft and bushings, Linear taper.




  4. 590 Series Benefits:


    Reduced cost potentiometer with the benefits of a conductive plastic element. Potential applications include manual controls, lighting and audio consoles, precision joysticks, welding and heating, and telecommunications.

  5. 590 Series - Features:
    1. Compact size, Conductive plastic element,
    2. 0.5 W power rating, Linear taper, PC terminals,
    3. Brass shaft and bushing, Linear taper.





image image image

Conductive Plastic Pots 578 Series 585 Series 590 Series
Description long life, precision metric sizes available multiple sections available
Expected rotational life 2.5 M cycles 10 k cycles 50 k cycles
Element type conductive plastic carbon conductive plastic
Power rating 0.5 W 0.5 W 0.5 W
Termination PC PC PC, solder hook
Resistance range 1 kOhm to 10 kOhm 1 kOhm to 10 kOhm 100 Ohm to 1 mOhm
Housing material glass-reinforced plastic thermoplastic polyester thermoplastic polyester
Bushing Ø9,53 mm [0.375 in]; nickel-plated brass M7 x 0.75 mm; nickel-plated brass 3/8-32 NEF-2A; nickel-plated brass
Shaft Ø6,35 mm [0.25 in]; nickel-plated brass Ø6 mm [0.24 in]; nickel-plated brass Ø3,18 mm [0.125 in]; nickel plated brass
Electrical taper linear CW audio, linear linear





    640 Series Benefits:


    Thru-shaft configuration allows use in space-constrained applications where there may not be enough room for a shaft/bushing integral to the sensor. May be used in rugged environments where space constraints may be present. Designed to provide protection against dust or moisture ingress. Long rotational life promotes extended life in the application. Potential applications include position and movement detection in construction/agricultural vehicles/equipment, vehicle manual controls, pedals, steering equipment, audio/visual equipment, industrial vehicle attachments machine control joysticks, robotic arms, valve actuators and material handling equipment.

  1. 640 Series - Features:
    1. Thru-shaft configuration actuated by customer-provided actuator shaft,
    2. Reinforced, low-profile housing, Dust sealed with splash or moisturesealed options,
    3. Long rotational life of greater than one million cycles.





image

Conductive Plastic Pots 640 Series
Description thru-shaft potentiometer, low profile housing
Expected rotational life >1 million cycles full cycles
Element type conductive plastic
Power rating 0.5 W max.
Termination three or six 20 AWG leadwires
Resistance range 1 kOhm to 1 MOhm, inclusive
Housing material reinforced thermoplastic
Bushing none (slotted rotor)
Shaft none (customer provided)
Electrical taper linear, linear quadrature





    CERMET AND WIREWOUND POTENTIOMETERS:


    309/409 Series Benefits:


    Reduced cost potentiometer that offers the temperature stability of a cermet element and a 1 watt power rating in a compact body. Stable over operating temperature. Potential applications include audio consoles, lighting controls, precision joysticks, telecom control systems, manual controls, medical equipment, telecommunications, and marine controls.

  1. 309/409 Series - Features:
    1. Compact, Modular package, Cermet element,
    2. 1 W power rating, Enhanced performance,
    3. 409 is sealed for board washing, PC and solder-hook terminals.




  2. 43/RA20 Series Benefits:


    Very stable over operating temperature. Potential applications include manual controls, welding, and heating.

  3. 43/RA20 Series - Features:
    1. Wirewound element, 2 W power rating,
    2. RA20 meets MIL-R-19 standards, Rugged metal construction,
    3. Nickel-plated brass shaft, Lock-style bushing available, Linear taper.





image image

Cermet and Wirewound Pots 309, 409 Series 43, RA20 Series
Description • 309: compact modular house
• 409: sealed for board washing
RA20 meets MIL-R-19
Expected rotational life 25 k cycles 10 k cycles
Element type cermet wirewound
Power rating 1 W 2 W
Termination PC, solder hook solder lug
Resistance range 100 Ohm to 5 MOhm 43: 10 Ohm to 50 kOhm RA20: 50 Ohm to 15 kOhm
Housing material thermoplastic polyester stainless steel
Bushing 1/4-32 NEF-2A, 3/8-32 NEF-2A; nickel-plated brass; standard 3/8-32 NEF-2A; stainless steel, standard, locking
Shaft Ø3,18 mm [0.125 in], Ø6,35 mm [0.250 in]; nickel-plated brass various diameters; nickel plated brass
Electrical taper linear linear





    58/RA30 Series Benefits:


    Designed to be stable over operating temperature. Potential applications include manual controls, welding, and heating.

  1. 58/RA30 Series - Features:
    1. Wirewound element, 4 W power rating,
    2. RA30 meets MIL-R-19 standards, Rugged metal construction,
    3. Nickel-plated brass shaft, Lock-style bushing available, Linear taper.




  2. 591 Series Benefits:


    Reduced cost potentiometer with the benefits of a cermet element. Designed to be stable over operating temperature. Potential applications include manual controls, welding and heating, telecommunications.

  3. 591 Series - Features:
    1. Compact size, Cermet element, 1 W power rating,
    2. Temperature stability, Linear taper, PC terminals,
    3. Brass shaft and bushing, Linear taper.




  4. 73 Series Benefits:


    Precision-type potentiometer made with a wirewound element. Offers 10 turns for enhanced resolution and accurate output. Potential applications include manual controls.

  5. 73 Series - Features:
    1. Wirewound element,
    2. 2 W power rating, 10-turn construction,
    3. Nickel-plated brass shaft and bushings, Linear taper.





image image image

Cermet and Wirewound Pots 58, RA30 Series 591 Series 73 Series
Description RA30 meets MIL-R-19 multiple sections available 10-turn construction
Expected rotational life 25 k cycles 25 k cycles 50 k cycles
Element type wirewound cermet wirewound
Power rating 4 W 1 W 2 W
Termination solder lug PC, solder hook solder lug
Resistance range 58: 50 Ohm to 50 kOhm RA30: 25 Ohm to 25 kOhm 500 Ohm to 100 kOhm 100 Ohm to 100 kOhm
Housing material stainless steel thermoplastic polyester glass-filled nylon
Bushing 3/8-32 NEF-2A; stainless steel; standard, locking 3/8-32 NEF-2A; nickel-plated brass; standard 3/8-32 UNEF-2A; nickel-plated brass; standard
Shaft various diameters; nickel-plated brass Ø3,18 mm [0.125 in]; nickel-plated brass Ø6,35 mm [0.25 in]; stainless steel or glass filled nylon
Electrical taper linear linear linear





    LINEAR POTENTIOMETERS:


    AQLT Series Benefits:


    Fits in tight spaces and clamps easily to cylinders. Improves shock and vibration performance. Smooth quiet motion; extends operating life. Enhanced performance in hostile environments. Low noise level often. Accurate position at power up. Magnetic actuator replaces the shaft found in traditional linear transducers and often eliminates need for additional stroke length mounting space. Enhanced life and often reliable operation in potential applications including in-tank level sensing, robotic motion control, woodworking guides, seismology, packaging and processing equipment, animated characters, marine steering systems, off-road vehicles, semiconductor process equipment, and medical equipment.

  1. AQLT Series - Features:
    1. 1/2 in body diameter, Multiple finger-wiper design, Extruded wiper block guides,
    2. MystR® plastic element, Anodized extruded aluminum housing, Sealed construction,
    3. Precious metal contact, Absolute continuous measurement, Infinite resolution,
    4. Tolerates clamping loads, Tested up to one billion operations,
    5. Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F, and G for hazardous (indoor/ outdoor) NEMA 4 locations.




  2. AQMLT Series Benefits:


    Fits in tight spaces and clamps easily to cylinders. Improves shock and vibration performance. Smooth quiet motion; extends operating life. Enhanced performance in hostile environments. Low noise level over entire life. Accurate position at power up. Magnetic actuator replaces the shaft found in traditional linear transducers and often eliminates need for additional stroke length mounting space. Enhanced life and often reliable operation in potential applications including in-tank level sensing, robotic motion control, woodworking guides, seismology, packaging and processing equipment, animated characters, marine steering systems, off-road vehicles, semiconductor process equipment, and medical equipment.

  3. AQMLT Series - Features:
    1. 3/8 in body diameter, Multiple finger-wiper design, Extruded wiper block guides,
    2. MystR® plastic element, Anodized extruded aluminum housing, Sealed construction,
    3. Precious metal contact, Absolute continuous measurement, Infinite resolution,
    4. Tolerates clamping loads, Tested up to one billion operations,
    5. Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F, and G for hazardous (indoor/ outdoor) NEMA 4 locations.





image image

Linear Potentiometers AQLT Series AQMLT Series
Description shaftless, waterproof linear position transducer shaftless, waterproof linear position transducer
Operating temperature range -40 °C to 80 °C [-40 °F to 176 °F] -40 °C to 80 °C [-40 °F to 176 °F]
Supply voltage 30 Vdc max. 30 Vdc max.
Linearity ±1 % ±1 %
Starting force 56,7 g [2 oz] max. 28,35 g [1 oz] max.
Backlash NA n/a
Total resistance 6 kOhm to 38 kOhm 750 Ohm to 18 kOhm
Measurement range 127 mm to 965 mm [5 in to 38 in] 12,7 mm to 304,8 mm [0.5 in to 12 in]
Shaft NA n/a
Total mechanical travel 154,94 mm to 967,74 mm [6.1 in to 38.1 in] 15,24 mm to 307,34 mm [0.6 in to 12.1 in]
Electrical travel 152,4 mm to 965,2 mm [6 in to 38 in] 12,7 mm to 304,8 mm [0.5 in to 12 in]
Housing length electrical travel + 54,87 mm [2.16 in] electrical travel + 38,1 mm [1.5 in]
Vibration 20 g/0,75 mm (rms) 5 Hz to 2 kHz 20 g/0,75 mm (rms) 5 Hz to 2 kHz
Shock 50 g 11 ms half sine 50 g 11 ms half sine
Expected operating life one billion dither operations one billion dither operations
Resistance tolerance ±20 % ±20 %
Insulation resistance 500 mOhm at 500 Vdc 500 mOhm at 500 Vdc
Dielectric strength 250 V rms 250 V rms
Termination cable cable





    MLT Series Benefits:


    Fits into tight spaces, clamps easily to cylinders. Improves shock and vibration performance. Smooth, quiet motion; extends operating life. Tolerates clamping loads. Rugged construction to withstand hostile environments. Often accurate position at power up. Provides usable output at high vibration levels for long periods. Reduces error from shaft misalignment. Diameter is among the smallest available and can replace displacement transducers in many applications. Potential applications include animated characters, gauging, fluid flow meters, seismology, semiconductor processing, linear actuators, hospital beds, and other medical equipment.

  1. MLT Series - Features:
    1. 3/8 in diameter, Dual-wiper design Extruded wiper-block guides, MystR® plastic element,
    2. Stainless-steel shaft, Internal spring-loaded ball joint, Anodized extruded aluminum housing,
    3. Precious metal contact, Absolute continuous measurement, Infinite resolution,
    4. Enhanced reliability, Tested up to one billion operations,
    5. Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F, and G for hazardous (indoor/outdoor) NEMA 4 locations.




  2. DR Series Benefits:


    No wiper bounce in high vibration environments. Improved life under high misalignment. Smooth, whisper-quiet operation under large misalignment. Rugged construction to withstand hostile environments. Provides enhanced performance, low noise, no oxidation. Works with simple controllers. Enhanced life even under side load conditions. Often accurate position at power-up. This long-lasting, rodless, sidesealed transducer may be used to replace rodded potentiometers in contaminated applications. Potential applications include injection molding machines, printing presses, meat packing equipment, drill presses, woodworking machines, cranes, front-end loaders, and scales.

  3. DR Series - Features:
    1. Vibration-damped element, Extended side bearing, Extruded wipercarrier guides,
    2. Rugged ribbed housing, Precious metal wipers, MystR® plastic elements,
    3. High dc level output, Enhanced performance bearings, Absolute continuous measurement,
    4. Infinite resolution, NEMA 4 sealing, Tested up to one billion operations,
    5. Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F, and G for hazardous (indoor/outdoor) NEMA 4 locations.





image image

Linear Potentiometers MLT Series DR Series
Description plunger-driven linear transducer Durastar rodless, space-saving side actuator
Operating temperature range -40 °C to 80 °C [-40 °F to 176 °F] -65 °C to 105 °C [-85 °F to 221 °F]
Supply voltage 30 Vdc max. 75 Vdc max.
Linearity ±1 % 0.1 % from 1% to 100% of theoretical electrical travel
Starting force 28,35 g [1 oz] max. 0,45 kg [1.0 lb]
Backlash 0,0127 mm [0.0005 in] max. 0,025 mm [0.001 in] max.
Total resistance 750 Ohm to 9 kOhm 2 kOhm to 10 kOhm
Measurement range 13 mm to 152 mm [0.5 in to 6 in] 102 mm to 1270 mm [4 in to 50 in]
Shaft Ø3,18 mm [0.125] M5 x 0.8
Total mechanical travel 13,97 mm to 153,67 mm [0.55 in to 6.05 in] 106 mm to 1275 mm [4.2 in to 50.2 in]
Electrical travel 12,7 mm to 152,4 mm [0.5 in to 6 in] 101,6 mm to 1270 mm [4 in to 50 in]
Housing length electrical travel + 30,48 mm [1.2 in] 250 mm to 1418 mm [9.84 in to 55.83 in]
Vibration 20 g/0,75 mm (rms) 5 Hz to 2 kHz 20 g/0,75 mm (rms) 5 Hz to 2 kHz
Shock 50 g 11 ms half sine 50 g 11 ms half sine
Expected operating life one billion dither operations one billion dither operations
Resistance tolerance ±20 % ±20 %
Insulation resistance 500 mOhm at 500 Vdc 1000 mOhm at 500 Vdc
Dielectric strength 1000 V rms 1000 V rms
Termination cable Hirschmann GDM





    LFII Series Benefits:


    No wiper bounce in high vibration environments. Smooth, easy operation under high side loads and large misalignment. Provides enhanced performance, low noise, no oxidation. Works with simple controllers. Enhanced life even under side load conditions. Often accurate position at power-up. Protects internal components from harsh environments. Potential applications include injection molding machines, printing presses, meat packing equipment, drill presses, woodworking machines, cranes, front-end loaders, and scales.

  1. LFII Series - Features:
    1. Vibration-damped element, Extruded wiper carrier guides, Precious metal wipers,
    2. MystR® plastic elementsm, Stainless-steel shaftm, Enhanced dc level output,
    3. Enhanced performance bearings, Infinite resolution, Absolute continuous measurement,
    4. Shaft seals, Waterresistant option available, Metric Series available, Tested up to one billion operations,
    5. Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F, and G for hazardous (indoor/outdoor) NEMA 4 locations.




  2. SLF Series Benefits:


    Provides enhanced performance, low noise. Rugged construction for manufacturing environment. Enhanced life even with side load conditions. Protects internal components from factory environment. Often accurate position at power-up. Works with simple controls. Provides a high resolution, often absolute position measurement without external signal conditioners. Potential applications include injection molding machines, printing presses, meat packing equipment, drill presses, woodworking machines, cranes, and front-end loaders.

  3. SLF Series - Features:
    1. Precious metal wipers, 0.081 in thick housing with 6 mm [0.25 in] shaft,
    2. MystR® plastic elements, High level dc output, Enhanced performance bearings,
    3. Absolute continuous measurement, Shaft seals, Infinite resolution,
    4. Waterresistant option available, Tested up to one billion operations,
    5. Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F, and G for hazardous (indoor/ outdoor) NEMA 4 locations.




  4. LT Series Benefits:


    Fits into tight spaces, clamps easily to cylinders. Improves shock and vibration performance. Smooth, quiet motion; enhances operating life. Tolerates clamping loads. Rugged construction to withstand hostile environments. Often accurate position at power up. Provides usable output at high vibration levels for long periods. Diameter is among the smallest available and can replace displacement transducers in many applications. Potential applications include animated characters, gauging, fluid flow meters, seismology, semiconductor processing, linear actuators, hospital beds, and other medical equipment.

  5. LT Series - Features:
    1. 1/2 in diameter, Dual-wiper design, Extruded wiper-block guides, MystR® plastic element,
    2. Stainless-steel shaft, Anodized extruded aluminum housing, Precious metal contact,
    3. Absolute continuous measurement, Shaft seals for spray-or-hose-down environments,
    4. Infinite resolution, Enhanced reliability, Tested up to one billion operations,
    5. Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F, and G for hazardous (indoor/ outdoor) NEMA 4 locations.





image image image

Linear Potentiometers LFII Series SLF Series LT Series
Description vibration-resistant, plunger-driven linear transducer short stroke version of the LFII plunger-driven linear transducer
Operating temperature range -65 °C to 105 °C [-85 °F to 221 °F] -65 °C to 105 °C [-85 °F to 221 °F] -40 °C to 80 °C [-40 °F to 176 °F]
Supply voltage 30 Vdc max. 40 Vdc max. 30 Vdc max.
Linearity ±1 % ±1 % or ±0.1 % ±1 %
Starting force 0,45 kg [1 lb] (standard); LFIIW: 2,27 kg [5 lb] (water resistant) 1 lb (standard) 5 lb (water resistant) 28,35 g max. [1 oz max.] 12 oz max. (water resistant)
Backlash 0,025 mm [0.001 in] max. 0,025 mm [0.001 in] max. 0,00508 mm [0.0002 in] max.
Total resistance 5 kOhm 1,5 kOhm to 9 kOhm 1 kOhm to 10 kOhm
Measurement range 152 mm to 1219 mm [6 in to 48 in] 25 mm to 152 mm [1 in to 6 in] 25 mm to 254 mm [1 in to 10 in]
Shaft Ø6,35 mm [0.25 in] Ø6,35 mm [0.25 in] Ø3,18 mm [0.125]
Total mechanical travel 154,6 mm to 1221,4 mm [6.09 in to 48.09 in] 30,5 mm to 166,2 mm [1.2 in to 6.15 in] 26,7 mm to 255.3 mm [1.05 in to 10.05 in]
Electrical travel 152,4 mm to 1219,2 mm [6 in to 48 in] 25,4 mm to 152,4 mm [1 in to 6 in] 25,4 mm to 254 mm [1 in to 10 in]
Housing length electrical travel + 81,02 mm [3.19 in] electrical travel + 77,5 mm [3.05 in] electrical travel + 38,10 mm [1.50 in]
Vibration 20 g/0,75 mm (rms) 5 Hz to 2 kHz (for vibration levels up to 50 g rms and higher, additional housing clamps are required) 20 g/0,75 mm (rms) 5 Hz to 2 kHz 20 g/0,75 mm (rms) 5 Hz to 2 kHz
Shock 50 g 11 ms half sine 50 g 11 ms half sine 50 g 11 ms half sine
Expected operating life one billion dither operations one billion dither operations one billion dither operations
Resistance tolerance ±20 % ±20 % ±20 %
Insulation resistance 1000 mOhm at 500 Vdc n/a 500 mOhm at 500 Vdc
Dielectric strength 1000 V rms n/a 1000 V rms
Termination connector, binder series 681 connector, binder series 681 cable





MAGNETIC POSITION SENSORS:



SMART POSITION SENSORS:


    SPS Series Benefits:


    Variety of configurations provide application flexibility. Non contact design reduces wear and tear, improving reliability and durability, and minimizing downtime. Easy to install, takes four simple steps vs up to 14 steps some competitive products require, simplifying installation and reducing set-up costs. Because there are no moving parts within the sensor, Honeywell utilizes unique packaging materials that make the sensor more resistant to vibration, shock, and extreme temperatures. Air gap of up to 8,5 mm ±1,0 mm [0.334 in ±0.039 in] between sensor and magnet and variety of available output options (analog standard and other RS232-type baud rates) expand application opportunities. Adaptable, non-contacting design allows customers to eliminate unnecessary connections for installation, thereby reducing installation steps, installation time, and components. Electronics on board allow for flexible packaging and component compatibility with existing systems. Lighter in weight than LVDT (Linear Variable Differential Transformer) technology. High shock and vibration resistance allows for use in a wide variety of tough applications. Combined patented MR sensor and ASIC technology provides enhanced differentiation and performance. IP67 and IP69K sealing allow use in many harsh applications. RoHS-compliant materials meet Directive 2002/95/EC. Potential applications include valve position, material handling, plastic molding, cutting and slitting, wafer handling, CNC machines, passenger bus level position, truck-mounted crane outrigger position, heavy equipment attachment position, hydraulic cylinders, gear shift position in engine transmissions, aerial work lift platform position, rail-road crossing arms position, remote weapon systems elevation, ground-based solar panels elevation and azimuth, robotically-assisted surgery equipment position, steering and articulation angle, boom arm detection, solar panes and wind turbines.

  1. SPS Series - Features:
    1. Linear, arc and rotary configurations, Reliable, durable, Easy to install,
    2. Rugged, Flexible, Cost effective, Accurate, Adaptable, Lightweight, Simplifies design-in,
    3. Self-diagnostics feature, Combined patented MR sensor and ASIC technology,
    4. IP67 and IP69K sealing, RoHS compliant.





image image image

SMART Position Sensor Superior Measurement. Accuracy. Reliability. Thinking. SPS Series 35 mm Analog, 75 mm Analog, 225 mm Analog, Digital Linear Configurations SPS Series 100° and 180° Arc Configurations SPS Series 360° Rotary Configuration
Description Enables highly accurate motion control, improving operational efficiency and safety. Non-contact design eliminates mechanical failure mechanisms, reducing wear and tear, improving reliability and durability, and minimizing downtime. Robust in most harsh environments. Easy to install, reducing set-up costs.
Configuration linear arc rotary
Sensing range 35 mm: 0 mm to 35 mm [0 in to 1.38 in]
75 mm: 0 mm to 75 mm [0 in to 2.95 in]
225 mm: 0 mm to 225 mm [0 in to 8.86 in]
100°: 0° to 100°
180°: 0° to 180°
0° to 360°
Actuator sensing location on arc N/A 100°: inside or outside
180°: inside
N/A
Resolution 35 mm analog: 0,04 mm [0.0016 in]
75 mm analog: 0,05 mm [0.002 in]
225 mm analog: 0,14 mm [0.0055 in]
225 mm digital: 0,0035 mm [0.000137 in]
100° inside and outside: 0.06°
180° inside: 0.11°
0.01°
Supply voltage 35 mm: 4.75 Vdc to 5.25 Vdc
all other versions: 6 Vdc to 24 Vdc
100° inside: 6 Vdc to 24 Vdc, 18 Vdc to 40 Vdc
100° outside: 5 Vdc
180° inside: 6 Vdc to 24 Vdc, 18 Vdc to 40 Vdc
12 Vdc to 30 Vdc
Supply current 35 mm analog: 20 mA max.
75 mm analog: 32 mA max.
225 mm analog: 34 mA max.
225 mm digital: 88 mA max.
100° inside: 45 mA max.
100° outside: 30 mA max.
180° inside: 45 mA max.
90 mA max.
Output 35 mm analog: 0.55 Vdc to 4.15 Vdc
75 mm and 225 mm analog: 0 Vdc to 5 Vdc
225 mm digital: RS232 type
0.5 Vdc to 4.5 Vdc 4 mA to 20 mA
Air gap (sensor to magnet actuator clearance) 35 mm analog: 8,5 ±1,0 mm [0.334 ±0.039 in]
all other versions: 3,0 mm ±2,5 mm [0.118 in ±0.098 in]
100° inside: 7,8 ±2,5 mm [0.307 ±0.098 in]
100° outside: 9,2 ±2,5 mm [0.36 ±0.09 in]
180° inside: 8,58 ±2,5 mm [0.338 ±0.098 in]
3,0 ±2,0 mm [0.118 ±0.079 in]
Operating temperature range -40°C to 125°C [-40°F to 257°F] -40°C to 85°C [-40°F to 185°F] -40°C to 85°C [-40°F to 185°F]
Storage temperature range -40°C to 150°C [-40°F to 302°F] -40°C to 150°C [-40°F to 302°F] -40°C to 150°C [-40°F to 302°F]
Termination 35 mm analog: TYCO Super Seal 282087-1 integral connector
all other versions: 18 AWG flying leads
100° inside: 4-pin M12 connector, 18 AWG flying leads
100° outside: Ampseal 16 connector
180° inside: 4-pin M12 connector
5-pin male connector
Sealing IP67, IP69K IP67, IP69K IP67, IP69K
Radiated immunity 35 mm analog: 100 V/m per ISO 11452-2
all other versions: n/a
Conducted immunity 35 mm analog: 100 mA BCI per ISO 11452-4
all other versions: n/a
Housing material thermoplastic thermoplastic aluminum with powder coating
Approvals CE CE CE





    NON-CONTACT HALL-EFFECT POSITION SENSORS:


    RTY Series Benefits:


    Non-contact sensing in harsh transportation and industrial applications at a competitive cost. 35 M cycle product life provides long life in the application. Solid-state, Hall-effect technology provides non contact operation, long service life, low torque actuation and reduces worn out mechanisms. IP69K sealing and integral connector allows for use in harsh environments. EMI/EMC testing, reverse polarity and short circuit provide protection against installation errors and frequencies in the environment. Industry-standard termination, mounting pitch and pinout provide drop-in replacement for existing applications. Choice of sensing ranges provides flexibility in multiple applications, allowing OEMS the range of travel needed for the application. Potential transportation applications include position and movement detection (pedals, throttles, gear shift, levers, steering, linkages, and hitches) on trucks, buses, off-road vehicles, industrial/ construction/agricultural vehicles and equipment, cranes); suspension displacement/kneeling on buses, trucks; tilt/trim position on boat engines, tilling equipment), as well as industrial valve, HVAC damper control, and irrigation pivot control.

  1. RTY Series - Features:
    1. True, non-contact operation, Expected life: 35 M cycles,
    2. Solidstate Hall-effect technology, Rugged IP69K-sealed package with integral connector,
    3. Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit,
    4. Industry-standard AMP termination, 32 mm mounting pitch, North American and European pinout styles, and compact package, Eight operating ranges up to 360°.




  2. RTP Series Benefits:


    Non-contact sensing in harsh transportation and industrial applications at a competitive cost. Absence of an actuator shaft removes the wear and tear on the bearings caused by radial forces. IP69K sealing provides durability in most harsh environments. Tolerant to over-travel and allows use in most common applications. Available versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Potential transportation applications include position and movement detection (pedals, throttles, gear shift, levers, steering, linkages, and hitches) in trucks, buses, off-road vehicles, cranes, and industrial/construction/ agricultural vehicles and equipment; suspension/kneeling position in buses and trucks); tilt/trim position in boat engines and tilling equipment. Potential industrial applications include valve, HVAC damper, and irrigation equipment pivot control.

  3. RTP Series - Features:
    1. True, non-contact operation, Expected life: infinite rotation,
    2. Solid state Hall-effect technology, Rugged IP69K-sealed package,
    3. Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit protection,
    4. Industry-standard AMP termination, 32 mm mounting pitch, North American or European pinout styles, and compact package, Nine operating ranges to 360°.




  4. RPN Series Benefits:


    Long service life, low torque actuation, and reduced mechanism wear-out. Enhanced resistance to damage from incorrect wiring and electrical noise. Wide choice of sensing sensing.honeywell.com 7 ranges provides range of travel for most applications; tolerant to overtravel. Output choices provide flexibility of use within the application. Sealed package with integral connector provides enhanced durability. May be used in potential Transportation applications to detect pedals, throttles, gear shift levers, linkages, suspension and hitches in trucks, offroad vehicles, cranes and construction/agricultural/industrial equipment.

  5. RPN Series - Features:
    1. Solid-state Hall-effect technology, Expected life: 30 M cycles,
    2. Eight sensing ranges up to 360°, Reverse polarity, short circuit and EMC protection,
    3. Choice of operating ranges, outputs, and levers,
    4. IP67- or IP69K sealed package with integral connector.





image image image

Non-Contact Hall-Effect Rotary Position Sensors RTY Series RTP Series RPN Series
Sensing range 50° (±25°), 60° (±30°), 70° (±35°),
90° (±45°), 120° (±60°), 180° (±90°),
270° (±135°), 360° (±180°)
50° (±25°), 60° (±30°), 70° (±35°),
90° (±45°), 120° (±60°), 180° (±90°),
270° (±135°), 350° (±175°), 360° (±180°)
50° (±25°), 60° (±30°), 70° (±35°),
90° (±45°), 120° (±60°), 180° (±90°),
270° (±135°), 360° (±180°)
Input voltage low voltage: 5 Vdc ±0.5 Vdc
high voltage: 10 Vdc to 30 Vdc
low voltage: 5 Vdc ±0.5 Vdc
high voltage: 10 Vdc to 30 Vdc
5 Vdc, 8 to 30 Vdc, 10 Vdc to 30 Vdc
Output • low voltage: 0.5 V to 4.5 V ratiometric (standard); 4.5 V to 0.5 V ratiometric (inverted)
• high voltage: 0.5 V to 4.5 V ratiometric (standard); 4.5 V to 0.5 V ratiometric (inverted)
• low voltage: 0.5 V to 4.5 V ratiometric (standard); 4.5 V to 0.5 V ratiometric (inverted)
• high voltage: 0.5 V to 4.5 V ratiometric (standard); 4.5 V to 0.5 V ratiometric (inverted
0.25 V to 4.75 V, 0.5 V to 4.5 V, 1 V to 9 V,
3 V to 5 V, 4.5 V to 0.5 V, 4.75 V to 0.25 V,
4 mA to 20 mA, 20 mA to 4 mA
Input current • low voltage: 20 mA max.; during output to ground short, 25 mA max.
• high voltage: 32 mA max.; during output to ground short, 47 mA max.
• low voltage: 20 mA max.; during output to ground short, 25 mA max.
• high voltage: 32 mA max.; during output to ground short, 47 mA max.
20 mA max.
Operating temp. range -40°C to 125°C [-40°F to 257°F] -40°C to 125°C [-40°F to 257°F] -40°C to 125°C [-40°F to 257°F]
Termination AMP super seal AMP super seal AMP 1-1419168-1, AMP Superseal 282087-1, Deutsch DT04-3P
Life 35 M cycles infinite 30 M cycles
EMI/EMC • EMI radiated immunity: 100 V/m from 200 MHz to 1000 MHz per ISO11452-2
• EMI conducted immunity: - low voltage: 100 mA BCI per ISO11452- 4 from 1 MHz to 200 MHz - high voltage: 100 mA BCI per ISO11452-4 from 1 MHz to 400 MHz
• EMC: exceeds CE requirements
• EMI radiated immunity: 100 V/m from 200 MHz to 1000 MHz per ISO11452-2
• EMI conducted immunity: - low voltage: 100 mA BCI per ISO11452-4 from 1 MHz to 200 MHz - high voltage: 100 mA BCI per ISO11452-4 from 1 MHz to 400 MHz
• EMC: exceeds CE requirements
EMC: 200 V/m ISO 11452-3
Housing material PBT plastic PBT plastic PA66 plastic





    HRS Series Benefits:


    Long service life. Low torque actuation. Enhanced performance in harsh environments, especially those with vibration, shock and extreme temperatures. Reduced mechanical wear concerns. 10 M cycle product life (typical) promotes extended life in the application. Choice of termination types contributes to design flexibility in the application. Voltage output can reduce external circuitry and overall system complexity, lowering overall installation cost to the customer. Choice of antirotation locating pins limits rotation of the device in the application, preventing over-travel on levers and throttles. Designed to provide direct replacement for potentiometers, often allowing dropin conversion to Hall-effect technology. Potential applications include position and movement detection in off-road vehicles and construction/agricultural equipment gear shifters, joysticks, throttles, pedals, hitches, bucket/loaders, steering, auto-pilot/drive-by-wire system feedback, material handling, industrial vehicle attachments, robotic arms and valve actuators.

  1. HRS Series - Features:
    1. Solid-state Hall-effect technology, 10 M cycle product life (typical),
    2. Choice of termination types, Voltage output allows direct connection to the control system,
    3. Choice of anti-rotation locating pins, Rotary potentiometer package form factor.





image

Non-Contact Hall-Effect Rotary Position Sensors HRS Series
Sensing range 90° ±2°, 180° ±2°
Input voltage 5 Vdc ±10 %
Output 5 % to 95 % of applied Vdd, approx. (programmable) output ratiometric to supply)
Input current 5 mA typ.
Operating temp. range -40°C to 85°C [-40°F to 185°F]
Termination solder lug, flying wire leads, cable and connector
Life 10 M cycles
EMI/EMC EMI: 30 V/m, 10 kHz to 1000 MHz at 3 m
Housing material stainless steel





RESOLVERS:


    Honeywell Hawk™ 1-Inch Series Benefits:


    Non-contact magnetic technology eliminates mechanical contact, reducing wear and improving reliability and durability by enhancing operation in harsh environments (performance is not affected by sand, dust or water). Small outer diameter of 1 inch allows for use in size-restricted applications. Single speed operation (1 magnetic pole pair) allows for cost effective angle resolution over a 360°+ range. Wide voltage range allows customers to standardize on a resolver that meets their excitation voltage needs, simplifying sourcing and delivery, and saving time. Frequency range provides a wide variety of choices with which to power the device. Transformation ratios offer customers two choices, increasing flexibility of use within the application. Accuracy enables precise motion control of weapon systems and space positioning devices. Wide operating temperature range allows for use in harsh environments and meets standard military and space application requirements. Product delivery up to 1.5 times faster than many competitive products. Customization due to Honeywell’s manufacturing process. Global support due to Honeywell’s worldwide presence. Engineering expertise due to Honeywell’s 30+ years’ experience providing accurate, reliable, and durable resolvers for the aerospace and defense industries. Potential applications include providing absolute position feedback of the azimuth and/ or elevation angular planes for military electro-optical systems, fire control systems, gimbals, infrared systems, ordnance delivery and test equipment, as well as satellite, space station, space vehicle solar panel array and antennae positioning for optimum function.

  1. Honeywell Hawk™ 1-Inch Series - Features:
    1. Non-contact magnetic technology, Fully-housed configuration with bearing/shaft,
    2. Small outer diameter of 1 inch, Single speed operation (1 magnetic pole pair),
    3. Excitation voltage range of 2 V to 15 V, Excitation frequency range of 2000 Hz to 5000 Hz,
    4. Transformation ratio of 0.45 or 1.0, Accuracy of ±420 arcsec, Operating temperature range of -50.8°C to 93.3°C [-60°F to 200°F],
    5. Meets multiple military/aerospace specifications: DO-160D, MIL-STD-202G, MIL-STD- 810G, MIL-STD-81963B, MIL-STD- 461F; complies with space outgassing requirement SP-R0022.




  2. Honeywell Hawk™ 3-Inch Series:


  3. Honeywell Hawk™ 3-Inch Series - Features:
    1. Single and dual speed operation (1 and/or 16 magnetic pole pairs), Multiple configurations (pancake bare and pancake simple housed, fully housed) with rotary transformers,
    2. Operating temperature range of -50.8°C to 93.3°C [-60°F to 200°F], Accuracy of ±420 arcsec (1X), ±25 arcsec (16X), Excitation frequency range of 800 Hz to 5000 Hz,
    3. Excitation voltage range of 3 V to 15 V, Transformation ratio of 0.25 or 1.0, Shock of 50 g, 11 ms, Vibration of 15 g, 10 Hz to 2000 Hz, Non-contact magnetic technology,
    4. Endurance testing to MIL-hdbk-218 (6.2) (1200 hr at 1150 rpm),
    5. Meets multiple military/aerospace specifications: DO-160D, MIL-STD-202G, MIL-STD-810G,
    6. MILSTD-81963B, MIL-STD-461F; complies with space outgassing requirement SPR0022, product delivery, customizable, global support, engineering expertise.
    7. Potential applications include defense electro-optical and fire control systems, gimbals position and infrared feedback, aerospace space vehicle solar panels and antennae positioning, medical oncology equipment positioning, and industrial CNC/precision tooling.





image image

Resolvers Honeywell Hawk™ 1-Inch Series Honeywell Hawk™ 3-Inch Series
Configuration fully housed pancake (bare and simple housed), fully housed
Diameter 1 in 3 in
Speed 1X 1X; 1X and 16X
Accuracy ±420 arcsec 1X: ±420 arcsec (1800 arcsec in dual speed variants)
16X: ±25 arcsec (3 V to 15 V and 800 Hz to 2500 Hz)
Features transformer (360°+ mechanical) redundant transformer (360°+ mechanical) redundant, customizable





ENCODERS:


    510 Series Benefits:


    High resolution of up to 36 positions for applications that require high resolution. Gray code digital voltage output may eliminate the need for analog to digital converters, contributing to a more cost-effective solution. Wide operating temperature range helps minimize thermal performance issues. Horizontal or vertical mounting terminations promote flexibility in the application. Potential applications include audio/visual equipment, smoke detectors, irrigation controls, oscilloscopes, robotics, EKG and defibrillation machines.

  1. 510 Series - Features:
    1. Mechanical encoder, High resolution of up to 36 positions,
    2. Gray code digital voltage output,
    3. Wide operating temperature range of -40°C to 105°C [-40°F to 221°F], Mounting flexibility.




  2. 600 Series Benefits:


    Non-contact technology promotes long life in the application. Digital voltage output may eliminate the need for analog to digital converters, contributing to a more cost-effective solution. TTL-compatible output prevents triggering of false highs/lows due to ambient noise. Wide operating temperature range promotes flexibility in the applications. Designed to provide mounting flexibility. Potential applications include motor control, flow control, robotics, computer peripherals, welding equipment, portable diagnostic equipment, home healthcare respiratory equipment, surgical equipment and precision joysticks.

  3. 600 Series - Features:
    1. Optical encoder, Dual quadrature output generating 128 pulses per channel,
    2. Non-contact technology, with a minimum of 10 million shaft rotation: Digital voltage output,  
    3. TTL-compatible output, Wide operating temperature range of -40°C to 65°C [-40°F to 149°F] Choice of mounting terminations.





image image

Encoders 510 Series 600 Series
Type mechanical optical
Pulse per revolution 16, 9, 6, 4 128
Output 2- or 4-bit gray code quadrature square wave
Temperature range -40°C to 105°C [-40°F to 221°F] -40°C to 65°C [-40°F to 149°F]
Expected rotational life 100k cycles 10 million rotations min.
Operating speed 50 rpm max. 300 rpm max.
Terminals PC type C-30 type with/without bracket, B-110 type PC type B-66, PC type C-24, cable, cable/connector





    INERTIAL MEASUREMENT UNIT (IMU):


    6 Degrees of Freedom Inertial Measurement Unit, 6-D Motion Variant, 6DF Series Benefits:


    Six Sigma standards provide the highest level of product quality, performance, and consistency. Aluminum housing, corrosion-resistance, chemical compatibility, IP67 and IP69k ratings, wide operating temperature range EMI (electromagnetic interference) and EMC (electromagnetic compatibility) provide industry-leading durability. Industry-leading accuracy provides highly accurate 6-dimensional rotation and acceleration outputs. SAEJ1939 CAN 29 bit identifier communication output, IP67 and IP69k ratings, wide voltage range (7 V to 32 V), Deutsch connector, chemical compatibility eases integration. 6-dimensional motion sensing provides key equipment operating data, frees the operator to focus on equipment functions, enables precise control, increases accuracy, safety, stability, and operator productivity. Industry-leading voltage input flexibility (7 V to 32 V) allows customers to purchase only one catalog listing, allows the IMU to accommodate voltage fluctuation, and provides reverse polarity protection. Honeywell’s application engineers are available to provide troubleshooting and product design assistance. For Transportation applications with high volumes over 500 units per year, Honeywell will consider offering customers a choice of any CAN protocol. Industry-leading temperature performance provided by a temperature sensor placed within each rotation rate sensor within the IMU provides a temperature value to the processing module where the data samples are filtered and compensated. Long-term stability minimizes system calibration needs, maximizes system performance, and helps support system uptime. Large batches of the IMU are calibrated to a flat surface, providing calibration consistency between units and eliminating the customer’s need to calibrate the IMU.

  1. 6 Degrees of Freedom Inertial Measurement Unit, 6-D Motion Variant, 6DF Series - Features:
    1. Designed to Six Sigma standards, Industry-leading durability,
    2. Industry-leading accuracy,Eases integration, 6-dimensional motion sensing,
    3. Industry-leading voltage input flexibility (7 V to 32 V), Industry-leading application expertise,
    4. Industry-leading customization, Automotive-grade qualified,
    5. Industry-leading temperature performance, Long-term stability, No calibration needed.





image

Inertial Measurement Units (IMU) 6DF Series
Description 6 Degrees of Freedom, 6-D Motion Variant
Supply voltage 7 V to 32 V
Supply current 350 mA max.
Startup time 700 ms typ.
Output type SAEJ1939 CAN 29
Operating temperature range -40°C to 85°C [-40°F to 185°F]
Accelerometer 2 g, 6 g
Sealing IP67, IP69K
Housing material aluminum
Approvals/testing/qualifications EMI/EMC, ESD, mechanical and thermal shock, random vibration, humidity, salt spray, chemical compatibility, automotive grade





    PROXIMITY SENSORS:


    RDS80004 Series:


    Non-contact detection of rail wheel flanges at speeds up to 500 km/h. Ease of installation, electrically robust. Enhanced life, low in track maintenance. Supports extended lineside transmission distances. Facilitates use in wheel detection systems and fault diagnosis. Potential applications include train detection (presence, direction, speed), train direction detectors, and train axle counters.

  1. RDS80004 Series - Features:
    1. 2-wire dc inductive, Output current is proportional to the applied voltage and is designed to operate at a nominal 16 Vdc with a 1 kOhm load,
    2. Results in an output of 8 mA when no wheel is detected, and 2 mA when a wheel is detected
    3. Available in high and low frequency versions.



  2. Unprecedented value:


    Honeywell S&PS has developed a new inductive sensor line for potential transportation and industrial applications. And every proximity sensing part or solution is infused with our legendary quality.



    Two-wire Vector Impedance Technology:


    Our patented readout technique, when used with our two-wire proximity sensor, utilizes an algorithm and temperature compensation to provide precision gap measurement. Our proximity sensors have enhanced reliability (over 5 million units and 25 million flight hours for 340FW and 370 FW series).



    Impressive breadth of line:


    Honeywell S&PS meets the need of any fragmented market by offering several types of sensors, making us the “one-stop shop” versus niche companies. What’s more, products have been put to use in the field for years.



    Global Channel:


    Honeywell S&PS offers worldwide support and manufacturing, an important need in industrial segments.







image

Proximity Sensors RDS80004 Series
Description rail wheel proximity sensors
Housing material Polymide "Grilamid LKN5H"
Oscillating frequency 230 kHz ± 10%; 160 kHz ± 10%
Supply voltage 10 Vdc to 30 Vdc
Operating temperature range -40 °C to 80 °C [-40 °F to 176 °F]
Output current Supply voltage and load dependent; 2 mA/8 mA
Operating frequency (f) > 400 HZ
Vibration Sinusoidal 10 Hz to 2 kHz 20 g for 30 min, IEC 68-2-2
Nominal sensing distance 26,5 mm, 35mm*





    RDSA Series Benefits:


    Enhanced reliability. Reduces risk of error. Often eliminates problems with leaves, rust, snow, salt, grit, dust, and oil on rails. No rail cutting, drilling, or insulation is required if clamps are used. Can be installed in parallel with the old system, creating minimal changeover time. Potential applications include crossing gate closure on train approach (non fail-safe), train detection for monitoring systems, and wagon location/direction in marshalling yards.

  1. RDSA Series - Features:
    1. Train detection without track circuits,
    2. Directional and non-directional operating modes,
    3. Requires two wheel detections to validate train presence,
    4. Solid state technology, Self monitoring,
    5. Can detect train direction or position, Can detect sensor and power supply faults.




  2. RDSB Series Benefits:


    Enhanced reliability. Can detect sensor and power supply faults. Reduces risk of error. Often eliminates problems with leaves, rust, snow, salt, grit, dust, and oil on rails. No rail cutting, drilling, or insulation is required if clamps are used. Can be installed in parallel with the old system, creating minimal changeover time. Potential applications include crossing gate closure on train approach (non fail-safe), train detection for monitoring systems, and wagon location/direction in marshalling yards.

  3. RDSB Series - Features:
    1. Train detection without track circuits, Directional and non-directional operating modes,
    2. Requires two wheel detections to validate train presence,
    3. Solid state technology, Self monitoring, Can detect train direction or position.




  4. RDSC Series Benefits:


    Enhanced reliability. Robust design. Designed to provide fail-safe train depart output. Interfaces with existing crossing controls. Quick installation. Allows proactive maintenance and fault monitoring. Resistant to shock and vibration. Wide temperature range. Polarity independent – voltage may be reversed and sensor still works. Short circuit, overvoltage, and transient protection. Greatly reduces problems with leaves, rust, snow, salt, grit, dust, and oil on rails. Designed for use in potential reversing train applications.

  5. RDSC Series - Features:
    1. Train detection without track circuits, Zero speed and bi-directional sensing,
    2. Duplex microprocessor system, Relay outputs, Solid state technology,
    3. RS 232 diagnostic output, Detects standard rail wheels up to speeds of 281 mph,
    4. Connecting wires may be up to 2 miles only (>10,000 ft.), Sealing to IP 68.





image image image

Proximity Sensors RDSA Series RDSB Series RDSC Series
Description combined train approach and departure system train detection system – directional and nondirectional train departure control system
Housing type modular control unit Relay rack housing modular control unit
Housing material Polycarbon metal Polycarbon
Supply voltage 20 Vdc to 50 Vdc 20 Vdc to 48 Vdc 10 Vdc to 50 Vdc; 20 Vdc to 50 Vdc
Operating temperature range -25 °C to 70 °C [-13 °F to 158 °F] -25 °C to 70 °C [-13 °F to 158 °F] -25 °C to 70 °C [-13 °F to 158 °F]
Supply current max. @ 25 °C 1500 mA 250 mA 3000 mA; 1500 mA
Output functions non-vital train approach and vital train departure indication. Other outputs: timers and errors non-vital train detection at up to four locations or direction at two. Other outputs: fault status relay; extended fault status relay failsafe train depart relay output. Other outputs: train in island, system active and errors
Number of sensors used 8 up to 4 8 (RDSC012);
6 (RDSC010)
Printer output yes no yes
Train reversing capability no yes yes (RDSC012);
no (RDSC010)





    100 FW Series Benefits:


    Enhanced reliability. Environment proof, self-contained. Enclosed in a rugged hermetically sealed stainless steel housing. Designed to meet the requirements of aerospace, ordnance, marine, mass transit, and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  1. 100 FW Series - Features:
    1. All metal sensing, Shielded 3-wire dc sinking (NPN),
    2. Small housing, Stainless steel, High level of electronics protection,
    3. Leadwire or connector termination.




  2. 200 FW Series Benefits:


    Enhanced reliability. Environment-proof, self-contained. Enclosed in a rugged hermetically sealed stainless steel housing. Designed to meet the requirements of aerospace, ordnance, marine, mass transit, and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  3. 200 FW Series - Features:
    1. Hall-effect, magnetic field sensitive, High frequency switching,
    2. Shielded 3-wire dc sinking (NPN), Small housing, Stainless steel,
    3. High level of electronics protection, Leadwire or connector termination.




  4. 300 FW Series Benefits:


    The combined sensor and interface system offer highly enhanced reliability. Mean time between failure in excess of 500K hours when used with the Sensor Interface Module (ZS-00380 Series). Sensitive electronics on plug-in card for inside mounting. Enclosed in a rugged hermetically sealed stainless steel housing. Designed to withstand temperature extremes and exposure to salt, humidity, sand, dust, and corrosive fluids such as skydrol and typical aircraft fuels. Potential applications include aircraft landing gear, flight control surfaces, and aircraft door monitoring.

  5. 300 FW Series - Features:
    1. Ferrous metal sensing, Two-piece construction – stainless steel bushing or flange mount sensors and plug-in electronics card,
    2. Small size housing, Stainless steel, Reverse polarity,
    3. Designed to work in conjunction with Honeywell Sensor Interface Card (405 FW Series) or Sensor Interface Module (ZS-00380 Series).





image image image

Proximity Sensors 100 FW Series 200 FW Series 300 FW Series
Description one-piece 5/8” proximity sensor one-piece 5/8” proximity sensor two-piece proximity sensor
Technology ECKO hall ECKO
Target material all metals magnet ferrous metals
Load current 120 mA, 50 mA lamp 100 mA, 50 mA lamp 750 mA
Supply current 20 mA max. @ 25 °C 20 mA max. @ 25 °C 65 mA max.
Sensing face shielded; unshielded shielded shielded
Guaranteed actuation distance 1 mm to 1.99 mm [0.039 in to 0.0783 in]; 5 mm to 10 mm [0.197 in to 0.394 in] 2 mm to 2.99 mm [0.0787 in to 0.1177 in] 1.78 mm to 3.3 mm [0.07 in to 0.130 in]
Operating temperature range -55 °C to 125 °C [-67 °F to 257 °F] -54 °C to 100 °C [-65.2 °F to 212 °F] -77 °C to 125 °C [-106.6 °F to 257 °F]
Supply voltage 18 Vdc to 32 Vdc 18 Vdc to 32 Vdc 18 Vdc to 32 Vdc
Output type normally open, current sinking normally open/closed, current sinking normally open/closed, current sinking





    21 FW Series Benefits:


    Enhanced reliability. Small profile. Enhanced resistance to electromagnetic interference. Competitive cost. Often ideal for many locations on an aircraft, or potential applications with severe shock, vibration, temperature, and EMI environments. Potential applications include door and utility systems, high lift systems, hydraulic systems, valves, engine/thrust reverser systems, power generation systems, environmental control systems, aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  1. 21 FW Series - Features:
    1. Hall-effect, magnetic field sensitive,
    2. Single channel, 3-wire dc,
    3. Small housing, Stainless steel.




  2. 23 FW Series Benefits:


    Enhanced reliability. Small profile. Enhanced resistance to electromagnetic interference. Competitive cost. Often ideal for many locations on an aircraft, or applications with severe shock, vibration, temperature, and EMI environments. Potential applications include door and utility systems, high lift systems, hydraulic systems, valves, engine/thrust reverser systems, power generation systems, environmental control systems, aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  3. 23 FW Series - Features:
    1. Hall-effect, magnetic field sensitive,
    2. Triple channel, 9-wire dc,
    3. Small housing, Stainless steel.




  4. 5 FW Series Benefits:


    Enhanced reliability. Small profile. Enhanced resistance to electromagnetic interference. Competitive cost. Often ideal for many locations on an aircraft, or applications with severe shock, vibration, temperature, and EMI environments. Potential applications include door and utility systems, high lift systems, hydraulic systems, valves, engine/thrust reverser systems, power generation systems, environmental control systems, aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  5. 5 FW Series - Features:
    1. Hall-effect, magnetic field sensitive,
    2. Small housing, Stainless steel.





image image image

Proximity Sensors 21 FW Series 23 FW Series 5 FW Series
Description one-piece 12 mm proximity sensor one-piece 22.2 mm proximity sensor target, special, proximity sensor
Operating frequency 2000 Hz 2000 Hz n/a
Load current 20 mA 20 mA n/a
Supply current 25 mA 25 mA n/a
Housing material stainless steel stainless steel stainless steel
Sensing face stainless steel stainless steel stainless steel
Guaranteed actuation distance 250 Gauss 250 Gauss n/a
Operating temperature range -55 °C to 150 °C [-67 °F to 302 °F] -55 °C to 125 °C [-67 °F to 257 °F] -55 °C to 150 °C [-67 °F to 302 °F]
Shock 20 g 20 g n/a
Supply voltage 18 Vdc to 32 Vdc 18 Vdc to 32 Vdc n/a
BITE yes yes n/a
Short circuit no no n/a
Pressure proof no no n/a
Reverse polarity no no n/a
MTBF (hrs) 35000 115000 n/a
Output type normally open, current sinking normally open, current sinking n/a





    922AA2Y-A6P-Z722A Benefits:


    Environment-proof. Self contained. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Designed to meet the requirements of aerospace, ordnance, marine, and mass transit and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  1. 922AA2Y-A6P-Z722A - Features:
    1. All metal sensing, Stainless steel, Small housing
    2. High frequency switching, High level of electronics protection,
    3. Leadwire or connector termination.




  2. 922FS2-A6N-Z735A Benefits:


    Environment-proof. Self contained. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Designed to meet the requirements of aerospace, ordnance, marine, and mass transit and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  3. 922FS2-A6N-Z735A - Features:
    1. All metal sensing, Stainless steel, Small housing,
    2. High pressure capability (>350 bar), High level of electronics protection,
    3. Leadwire or connector termination.





image image

922 Series Proximity Sensors 922AA2Y-A6P-Z722A 922FS2-A6N-Z735A
Description one-piece 15/32” proximity sensor one-piece 12 mm proximity sensor
Dimension 11.7 mm [0.46 in] 12 mm [0.47 in]
Operating frequency 2000 Hz 2000 Hz
Load current 250 mA 250 mA
Gd (mm) 3.6 2.8
Guaranteed actuation distance 2 mm to 2.99 mm [0.0787 in to 0.1177 in] 1 mm to 1.99 mm [0.039 in to 0.0783 in]
Operating temperature range -55 °C to 85 °C [-67 °F to 185 °F] -55 °C to 85 °C [-67 °F to 185 °F]
Shock 6 g 11 ms ABD 0007 6 g 11 ms ABD 0007
Supply voltage 14 Vdc to 32.5 Vdc 14 Vdc to 32.5 Vdc
BITE no no
Short circuit yes yes
Pressure proof no yes
Reverse polarity no no
Output type normally open, current sourcing normally open, current sourcing





    ZS-00361 Benefits:


    Environment-proof. Self contained. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Designed to meet the requirements of aerospace, ordnance, marine, and mass transit and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  1. ZS-00361 - Features:
    1. Hall-effect, magnetic field sensitive, Stainless steel,
    2. Small housing, High level of electronics protection,
    3. High frequency switching, Leadwire or connector termination.




  2. 932AB2W Benefits:


    Environment-proof. Self contained. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Designed to meet the requirements of aerospace, ordnance, marine, and mass transit and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  3. 932AB2W - Features:
    1. All metal sensing, Stainless steel, Small housing,
    2. High level of electronics protection, High frequency switching,
    3. Leadwire or connector termination.





image image

M12 Proximity Sensors ZS-00361 932AB2W
Description one-piece M12 proximity sensor one-piece M12 proximity sensor
Load current 80 mA 200 mA
Sensing face crastin (plastic) ceramic
Gd (mm) 2.91 6.8
Guaranteed actuation distance 1 mm to 1.99 mm [0.039 in to 0.0783 in] 3 mm to 3.99 mm [0.118 in to 0.157 in]
Operating temperature range -25 °C to 85 °C [-13 °F to 185 °F] -40 °C to 100 °C [-40 °F to 212 °F]
Shock 400 g 11 ms 100 g 6 ms
Supply voltage 14 Vdc to 33 Vdc 20 Vdc to 33 Vdc
BITE no no
Short circuit yes yes
Pressure proof no no
Reverse polarity yes yes
Insulation resistance 50 Mohm @ 500 Vdc >50 Mohm @ 500 Vdc
Output type normally open/closed, current sourcing normally open, current sourcing





    ZS-00351-01 Benefits:


    Environment-proof. Self contained. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Designed to meet the requirements of aerospace, ordnance, marine, and mass transit and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  1. ZS-00351-01 - Features:
    1. All metal sensing, Stainless steel,
    2. Small housing, High level of electronics protection,
    3. Built in test function (BITE), Leadwire or connector termination.




  2. 932AA3W Benefits:


    Environment-proof. Self contained. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Designed to meet the requirements of aerospace, ordnance, marine, and mass transit and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  3. 932AA3W - Features:
    1. Hall-effect, magnetic field sensitive, Stainless steel,
    2. Small housing, High level of electronics protection,
    3. High frequency switching, Leadwire or connector termination.





image image

M18 Proximity Sensors ZS-00351-01 932AA3W
Description one-piece M18 proximity sensor one-piece M18 proximity sensor
Load current 100 mA ≤200 mA up to 85 °C to 100 mA at 100 °C
Sensing face ceramic ceramic
Gd (mm) 7.27 8.5
Guaranteed actuation distance 4 mm to 4.99 mm [0.1574 in to 0.19646 in] 4 mm to 4.99 mm [0.1574 in to 0.19646 in]
Operating temperature range -35 °C to 63 °C [-31 °F to 145 °F] -40 °C to 100 °C [-40 °F to 212 °F]
Shock 500 g 0.5 ms 100 g 6 ms
Supply voltage 12 Vdc to 32 Vdc 20 Vdc to 323 Vdc
BITE yes no
Short circuit yes yes
Pressure proof no no
Reverse polarity yes yes
Insulation resistance 10 Mohm @ 500 Vdc >50 Mohm @ 500 Vdc
Output type normally open, current sinking normally open, current sourcing





    ZS-00240-03B Benefits:


    Environment-proof. Self contained. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Designed to meet the requirements of aerospace, ordnance, marine, and mass transit and high performance industrial equipment. Potential applications include aircraft landing gear, gun turret position control, and door and hatch open/closed monitoring.

  1. ZS-00240-03B - Features:
    1. Hall-effect, magnetic field sensitive, Stainless steel,
    2. Small housing, High level of electronics protection,
    3. High frequency switching, Leadwire or connector termination.




  2. ZS-00228-050 Benefits:


    Environment-proof. Self contained. Enclosed on rugged hermetically sealed ceramic/stainless steel housing and overmoulded to provide complete encapsulation. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Potential applications include submarine control systems, submersible vehicles, offshore underwater equipment, and underwater pipeline controls.

  3. ZS-00228-050 - Features:
    1. All metal sensing, High level sealing by overmoulding,
    2. Enhanced performance sealed and shielded cable,
    3. Reverse polarity and short circuit protection.




  4. ZS-00341 Benefits:


    Environment-proof. Self contained. Enclosed on rugged hermetically sealed ceramic/stainless steel housing and overmoulded to provide complete encapsulation. Operation by the Eddy Current Killed Oscillator (ECKO) principle to detect metallic objects passing in front of the sensing face. Designed to meet the requirements of aerospace and marine applications. Potential applications include aircraft hydraulic systems, fighting vehicle engine/transmission controls, and ship and submarine hydraulic systems.

  5. ZS-00341 - Features:
    1. Ferrous metal sensing, All stainless steel construction including sensing face and laser welded connector,
    2. High pressure capability up to 205 bar (system pressure),
    3. Enhanced level of electronics protection, Mean time between failure is 126K hours.





image image image

M30 Proximity Sensors ZS-00240-03B ZS-00228-050 ZS-00341
Description one-piece M30 proximity sensor one-piece underwater proximity sensor one-piece underwater proximity sensor
Load current 200 mA 250 mA ≤120 mA
Housing material stainless steel polyethylene stainless steel
Sensing face ceramic overmoulded stainless steel
Gd (mm) 11.64 16 16
Guaranteed actuation distance 5 mm to 10 mm [0.197 in to 0.394 in] 5 mm to 10 mm [0.197 in to 0.394 in] ZS-00341-01: ≥0.8 mm; ZS-00341-02: ≥21.84 mm
Operating temperature range -55 °C to 85 °C [-67 °F to 185 °F] -40 °C to 85 °C [-40 °F to 185 °F] -55 °C to 90 °C [-67 °F to 194 °F]
Shock 100 g 6 ms 6 g 11 ms 6 g 11 ms
Supply voltage 14 Vdc to 33 Vdc 10 Vdc to 32.2 Vdc 14 Vdc to 32.5 Vdc
BITE no no no
Short circuit yes yes yes
Pressure proof no no yes
Reverse polarity yes yes yes
Output type normally open/closed, current sourcing normally open, current sourcing normally open, current sourcing





AEROSPACE POSITION MEASUREMENT:


Comprehensive Offering. World Class Performance. Across the range of Honeywell's Aerospace position measurement products, there's a consistent theme of rugged design and unparalleled support that Honeywell customers agree is not easily found elsewhere.

  • Externally mounted flap, stabilizer, rudder position.
  • Externally mounted landing gear steering.
  • Engine mounted exhaust nozzle position.
  • Designed for use in pilot controls.
  • Precision resolvers.

Honeywell provides a range of position measurement products designed specifically for the most demanding aerospace and military applications and customers. We specialize in working with customers to create and deliver not only a sensor, but a full solution for nearly any position measurement need.

  • Integral gearing.
  • Environmental protection.
  • Redundant channels.
  • Higher level assemblies.

Potentiometers Sensors Position Sensors Proximity Sensors